Series 334
Digital V-Anvil Micrometer
Measure the outside diameter of cutting tools (such as taps, reamers, end mills) with 3 or 5 flutes
Resolution: 0.001mm/0.00005"
Button: on/off, set, mm/inch,ABS/INC, data output
Automatic power off, Ratchet stop
Data output
Carbide measuring faces
Specifications
| Part No | Status | WebEnabled | Range | Accuracy | Setting Standards | Type | Flutes |
|---|---|---|---|---|---|---|---|
| AC-334-015-01 | Order In | 1 | 1-15mm/0.04-0.6" | ±4μm | 5mm | A | 3 |
| AC-334-020-01 | Order In | 1 | 5-20mm/0.2-0.8" | ±4μm | 5mm | B | 3 |
| AC-334-035-01 | Order In | 1 | 20-35mm/0.8-1.4" | ±5μm | 20mm | B | 3 |
| AC-334-050-01 | Order In | 1 | 35-50mm/1.4-2.0" | ±5μm | 35mm | B | 3 |
Note: ETA for Order In products is between 8-12 weeks.
Similar Products
Digital Outside Micrometer
Series 312
Digital Outside Micrometer
Series 313
IP65 Digital Outside Micrometer
Series 313
IP65 Digital Outside Micrometer
Series 313
IP65 Digital Snap Micrometer
Series 314
Digital Blade Micrometer
Series 316
IP54 Digital Point Micrometer
Series 317
